2014-2023 Lexus GX460 Runner Guard
-
Our GX460 Runner Guard Assembly mounts directly to the main rail as well as the bumper beam, providing protection to the OEM bumper and recovery towing points.
-
Our GX460 Runner Guard Assembly is made with 1/8 inch - 3/16 inch high-strength steel to ensure durability.
-
Our Runner Guard Assembly does not require any modification or trimming of the OEM parts on the car.
-
Our slotted mounting design allows the Modular Frame Adapter to shift during a frontal collision, allowing the assembly to absorb frontal impact energy. This is designed to preserve the structural integrity of the main rails/ladder frame.
-
Our Runner Guard has two mounting locations on top for 13-slot accessory rails, which will allow you to mount any accessories on it.
-
Our Runner Guard Kit is a simple bolt-on, without the need to remove the OEM bumper.
Impact Absorption
Our proprietary design of the GX460 Modular Frame Adapter enables it to shift and crumple during a frontal collision, allowing the assembly to absorb frontal impact energy. This is designed to preserve the structural integrity of the main rails/ladder frame during a low to medium speed frontal collision.
These images above show a GX460 with our NYTOP Bull Bar Assembly installed involving in a driver-side overlap frontal collision, at the speed of around 25-30 mph (40-50 km/h). During the accident, the Modular Frame Adapters shifted and crumpled as designed, absorbing most of the impact energy. As a result, the vehicle suffered only minor cosmetic damages, and no frame damage.
Off-Road High Lift Jack compatible
Our NYTOP GX460 Runner Guard is engineered to be much stronger than your typical runner guard that will bend with very little force.
Not only can our runner guard handle the weight of the vehicle, it also has built-in jacking points for off-road emergencies.
Gallery
