2016-2023 Toyota Tacoma Fender Flare Kit
2016-2023 (3th Gen) Toyota Tacoma Fender Flare Kit. Fits all trims. (Pre-order. Coming Mid 2025.)
Our 2016-2023 Toyota Tacoma Fender Flare Kit adds 1.5-2 inch per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.
The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.
The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.
The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.
In order to install on SR models, you may need to purchase some OEM 10mm wheel well bolts, in order to install the flares.
The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.
We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).
Shipping only available to the U.S. 50 states, Puerto Rico, Canada, Mexico, Finland, Australia, Saudi Arabia and Mainland China. For other overseas shipping, please email us at contact@nytop.com for further details. Overseas customers are responsible for any potential import fees.
2016-2023 (3th Gen) Toyota Tacoma Fender Flare Kit. Fits all trims. (Pre-order. Coming Mid 2025.)
Our 2016-2023 Toyota Tacoma Fender Flare Kit adds 1.5-2 inch per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.
The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.
The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.
The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.
In order to install on SR models, you may need to purchase some OEM 10mm wheel well bolts, in order to install the flares.
The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.
We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).
Shipping only available to the U.S. 50 states, Puerto Rico, Canada, Mexico, Finland, Australia, Saudi Arabia and Mainland China. For other overseas shipping, please email us at contact@nytop.com for further details. Overseas customers are responsible for any potential import fees.
2016-2023 (3th Gen) Toyota Tacoma Fender Flare Kit. Fits all trims. (Pre-order. Coming Mid 2025.)
Our 2016-2023 Toyota Tacoma Fender Flare Kit adds 1.5-2 inch per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.
The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.
The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.
The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.
In order to install on SR models, you may need to purchase some OEM 10mm wheel well bolts, in order to install the flares.
The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.
We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).
Shipping only available to the U.S. 50 states, Puerto Rico, Canada, Mexico, Finland, Australia, Saudi Arabia and Mainland China. For other overseas shipping, please email us at contact@nytop.com for further details. Overseas customers are responsible for any potential import fees.