2025-Current Toyota 4Runner Rock Sliders
2025-Current (6th Gen) Toyota 4Runner Rock Sliders (Pair). Fits all trims and powertrains. (Built to order. Estimated lead time 8-14 weeks.)
Our Not Your Typical Rock Sliders for the Toyota 4Runner is high clearance, low profile, and non-tubular.
Crafted with a non-traditional design that forgoes conventional tubular construction, which allows for a 28.5° flat, angled bottom surface optimized for sliding, while the top remains level to provide a practical stepping platform for effortless vehicle entry and exit.
They are finished in wrinkled black powder coat, and made with 3/16 inch and 1/4 inch high-strength steel to ensure durability.
The rock sliders mount directly to the frame, providing protection to the vehicle’s body, while also acting as side steps. On certain non-offroad trims, the rock sliders need to be installed with ¼ inch self expansion bolts. Check on both sides of the frame to see if there are threaded nuts welded on the backside of the mounting holes, to determine if self expansion bolts are needed. The rock sliders can be welded on as well.
All necessary mounting hardware included. ¼ inch self expansion bolts (16 needed) not included.
All necessary mounting hardware included.
Torque down all the M10 bolts to 48 ft-lbs./65 Nm.
Shipping only available to the U.S. 50 states, Puerto Rico, Canada, Mexico, Finland, Australia, Saudi Arabia and Mainland China. For other overseas shipping, please email us at contact@nytop.com for further details. Overseas customers are responsible for any potential import fees.
2025-Current (6th Gen) Toyota 4Runner Rock Sliders (Pair). Fits all trims and powertrains. (Built to order. Estimated lead time 8-14 weeks.)
Our Not Your Typical Rock Sliders for the Toyota 4Runner is high clearance, low profile, and non-tubular.
Crafted with a non-traditional design that forgoes conventional tubular construction, which allows for a 28.5° flat, angled bottom surface optimized for sliding, while the top remains level to provide a practical stepping platform for effortless vehicle entry and exit.
They are finished in wrinkled black powder coat, and made with 3/16 inch and 1/4 inch high-strength steel to ensure durability.
The rock sliders mount directly to the frame, providing protection to the vehicle’s body, while also acting as side steps. On certain non-offroad trims, the rock sliders need to be installed with ¼ inch self expansion bolts. Check on both sides of the frame to see if there are threaded nuts welded on the backside of the mounting holes, to determine if self expansion bolts are needed. The rock sliders can be welded on as well.
All necessary mounting hardware included. ¼ inch self expansion bolts (16 needed) not included.
All necessary mounting hardware included.
Torque down all the M10 bolts to 48 ft-lbs./65 Nm.
Shipping only available to the U.S. 50 states, Puerto Rico, Canada, Mexico, Finland, Australia, Saudi Arabia and Mainland China. For other overseas shipping, please email us at contact@nytop.com for further details. Overseas customers are responsible for any potential import fees.
2025-Current (6th Gen) Toyota 4Runner Rock Sliders (Pair). Fits all trims and powertrains. (Built to order. Estimated lead time 8-14 weeks.)
Our Not Your Typical Rock Sliders for the Toyota 4Runner is high clearance, low profile, and non-tubular.
Crafted with a non-traditional design that forgoes conventional tubular construction, which allows for a 28.5° flat, angled bottom surface optimized for sliding, while the top remains level to provide a practical stepping platform for effortless vehicle entry and exit.
They are finished in wrinkled black powder coat, and made with 3/16 inch and 1/4 inch high-strength steel to ensure durability.
The rock sliders mount directly to the frame, providing protection to the vehicle’s body, while also acting as side steps. On certain non-offroad trims, the rock sliders need to be installed with ¼ inch self expansion bolts. Check on both sides of the frame to see if there are threaded nuts welded on the backside of the mounting holes, to determine if self expansion bolts are needed. The rock sliders can be welded on as well.
All necessary mounting hardware included. ¼ inch self expansion bolts (16 needed) not included.
All necessary mounting hardware included.
Torque down all the M10 bolts to 48 ft-lbs./65 Nm.
Shipping only available to the U.S. 50 states, Puerto Rico, Canada, Mexico, Finland, Australia, Saudi Arabia and Mainland China. For other overseas shipping, please email us at contact@nytop.com for further details. Overseas customers are responsible for any potential import fees.
NYTOP Rock Slider Stress Test Results
1.3 Metric ton (2866 lbs): 2mm flex with full spring back.
1.7 Metric ton (3748 lbs): 3mm flex with 1mm deformation after spring back.
2 Metric ton (4409 lbs): 4mm flex with 1.5mm deformation after spring back.
3 Metric ton (6614 lbs): 6mm flex with 2mm deformation after spring back.