Ford
F-150 Raptor (2021+)
Fender Flare Extension Kit
Fender Flare Extension Kit
Sold as a set with four flare-pieces.
2021-Current Ford F-150 Raptor (Gen3) Fender Flare Extension Kit. Coming late 2026.
Select quantity
1
F-150 Raptor (2021+)
Fender Flare Extension Kit
Fender Flare Extension Kit
Design & Engineering
Design & Engineering
Product Weight: 25 lbs. Our 2021-Current (Gen3) Ford F-150 Raptor Fender Flare Extension Kit adds 1 inch per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires. The kit is available in high-quality carbon fiber with either a gloss or a matte top coat finish.
Product Weight: 25 lbs. Our 2021-Current (Gen3) Ford F-150 Raptor Fender Flare Extension Kit adds 1 inch per corner. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires. The kit is available in high-quality carbon fiber with either a gloss or a matte top coat finish.
INSTALLation & USAGE
INSTALLation & USAGE
The Fender Flare Extensions are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to remove any OEM body panels. The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape. We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).
The Fender Flare Extensions are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to remove any OEM body panels. The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape. We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).
