Toyota
4Runner (2025+)
Rock Sliders
Rock Sliders
2025-Current (6th Gen) Toyota 4Runner Rock Sliders (Pair). Fits all trims and powertrains.
Select quantity
1
1
1
Add to Cart
OUT OF STOCK
Select Size
Add to Cart
OUT OF STOCK
Select Size
Add to Cart
OUT OF STOCK
Select Size
4Runner (2025+)
Rock Sliders
Rock Sliders
Design & Engineering
Design & Engineering
Product Weight (Pair): 150 lbs. Our Not Your Typical Rock Sliders for the Toyota 4Runner mount directly to the frame, providing protection to the vehicle's body, while also acting as side steps. They are finished in wrinkled black powder coat, and TIG welded with 3/16-inch and 1/4-inch high-strength steel to ensure durability. The sliders have a high clearance and a low profile. They are also crafted with a non-traditional design that forgoes conventional tubular construction. This change allows for a 28.5° flat, angled bottom surface optimized for sliding, while the top remains level to provide a practical, 5-inch wide stepping platform for effortless vehicle entry and exit.
Product Weight (Pair): 150 lbs. Our Not Your Typical Rock Sliders for the Toyota 4Runner mount directly to the frame, providing protection to the vehicle's body, while also acting as side steps. They are finished in wrinkled black powder coat, and TIG welded with 3/16-inch and 1/4-inch high-strength steel to ensure durability. The sliders have a high clearance and a low profile. They are also crafted with a non-traditional design that forgoes conventional tubular construction. This change allows for a 28.5° flat, angled bottom surface optimized for sliding, while the top remains level to provide a practical, 5-inch wide stepping platform for effortless vehicle entry and exit.
INSTALLation & USAGE
INSTALLation & USAGE
All necessary mounting hardware included. On certain non-offroad trims, the rock sliders need to be installed with 1/4-inch BoxBolts®. 1/4-inch BoxBolts® (12 needed) not included, sold separately. Check on both sides of the frame to see if there are threaded nuts welded on the backside of the mounting holes, to determine if self expansion bolts are needed. The rock sliders can be welded on as well. Torque down all the M10 bolts to 48 ft-lbs./65 Nm. Torque down the 1/4 inch BoxBolts® to 14 ft-lbs./19 Nm.
All necessary mounting hardware included. On certain non-offroad trims, the rock sliders need to be installed with 1/4-inch BoxBolts®. 1/4-inch BoxBolts® (12 needed) not included, sold separately. Check on both sides of the frame to see if there are threaded nuts welded on the backside of the mounting holes, to determine if self expansion bolts are needed. The rock sliders can be welded on as well. Torque down all the M10 bolts to 48 ft-lbs./65 Nm. Torque down the 1/4 inch BoxBolts® to 14 ft-lbs./19 Nm.
